Wooden Door Rapid Cold-pressing Laminating Production Line-Foshan City Vario Machinery Co., Ltd.

CT6-08

Paint-free door leaf cold-pressed composite production line

The average temperature rapid cold pressing only takes 45-90s for each door pressing. The thickness error is within the range of 0.15mm; The door frame is coated with A glue on both sides, the door panel is coated with B glue on one side, and the instant-dry water-based adhesive can form a strong initial adhesive force in a short time. Substrate, artificial group bad time, ambient temperature different production beat;

Learn more

PT1-01

Automatic Flat Laminating Line

After the press rises, closes, pressurizes, and holds pressure for the set time, the product is finished, and the press automatically opens and then automatically transports the product to the steering conveyor through the belt conveyor.

Learn more

CT8-01

Paint-free door leaf cold-pressed composite production line

The average temperature rapid cold pressing only takes 45-90s for each door pressing. The thickness error is within the range of 0.15mm; The door frame is coated with A glue on both sides, the door panel is coated with B glue on one side, and the instant-dry water-based adhesive can form a strong initial adhesive force in a short time. Substrate, artificial group bad time, ambient temperature different production beat;

Learn more

FT1-01

Honeycomb automatic composite production line

The production line puts down the panel through the suction cup elevator. After the combined press of the panel, door frame and bottom plate is raised, closed, pressurized and held for a set time, the product is completed. After the press is automatically opened, the product is automatically transported to the steering conveyor through the belt conveyor.

Learn more

YT5-08

Five-layer furniture veneer production line

"Multi-layer through the type of pressing" machine, electrical integration technology to achieve multi-layer boards at the same time pressure pasting requirements, multi-layer simultaneous pressing, effectively improve the production efficiency, this production line is mainly used for furniture factories and door factories specializing in laminating, hot pressing 180S, an average of 40S a board, the boards by the pressure pasted after the completion of the perfect non-marking, environmentally friendly and non-toxic; after gluing strength The strength after gluing reaches the technical performance index of gluing required by European standard.

Learn more

YT1-01

Furniture Veneer Production Line

This production line is my company for furniture factory and door factory veneer design and development, the production line longitudinal feeding a complete group of bad, maximize the avoidance of manual loading caused by cracking and overlapping defects of the surface material, can ensure the quality of the product pressure paste to meet the different specifications of the product double-sided pressure paste.

Learn more

MT5-08

Five-layer wooden door rapid cold pressing composite production line

"Multi-layer through-type pressing" machine, electrical integration technology to meet the requirements of multi-layer plate composite gluing, multi-layer simultaneous pressing, effectively improve the production efficiency, Cold pressing at room temperature for 5 minutes, with an average of 60S for a door. After processing, the plate is perfect, seamless, environmentally friendly and non-toxic. After gluing, the strength reaches the gluing technical performance index required by European standards.

Learn more

MT2-08

Stacked two-layer type door cold pressing composite automatic production line

Room temperature rapid cold pressing average of each door pressing as long as 45-90s; thickness error in the range of ± 0.15mm; Door frame double-sided coated with A glue, door plate single-sided coated with B glue, composite instantaneous drying water-based adhesive, can be formed in a short period of time a very strong initial bond; substrate, artificial group blank time, ambient temperature of different production beats are different.

Learn more

MT1-08

MT wooden door composite series-MT1-08 automatic short cycle fast composite production line

The average temperature fast cold pressing is only 45-90s for each door. The thickness error is within the range of 0.15mm; The door frame is coated with A glue on both sides, the door panel is coated with B glue on one side, and the instant-dry water-based adhesive after compounding can form a strong initial bonding force in a short time; The production rhythm is different with different substrate, artificial blank time and ambient temperature;

Learn more

MT1.1-01

MT Wooden Door Composite Series-MT1.1-01 Wooden Door Short Cycle Fast Composite Production Line

The average temperature fast cold pressing is only 45-90s for each door. The thickness error is within the range of 0.15mm; The door frame is coated with A glue on both sides, the door panel is coated with B glue on one side, and the instant-dry water-based adhesive after compounding can form a strong initial bonding force in a short time; The production rhythm is different with different substrate, artificial blank time and ambient temperature;

Learn more

100 tons hot press series -100 tons 1 layer hot press

It is mainly used in furniture factories or wood-based panel secondary processing factories for hot pressing and bonding furniture panels, building partitions, wooden doors and various decorative materials on the surface of various wood-based panels. It can also be used for drying and leveling of veneer and leveling of color decorative wood chips. Walnut/red oak/black trough can be pressed! Natural/dyeing/technology veneer, etc. can be pressed! 0.6-0.2cm can be pressed! Particle board/multilayer board/density board can be pressed! Solid wood/man-made board/metal plate can be pressed! PUR/EVA waterproof glue can be pressed! Wooden door/large board/small board/veneer, etc. can be pressed!

Learn more

100 ton hot press series -100 ton 3-layer hot press

It is mainly used in furniture factories or wood-based panel secondary processing factories for hot pressing and bonding furniture panels, building partitions, wooden doors and various decorative materials on the surface of various wood-based panels. It can also be used for drying and leveling of veneer and leveling of color decorative wood chips. Walnut/red oak/black trough can be pressed! Natural/dyeing/technology veneer, etc. can be pressed! 0.6-0.2cm can be pressed! Particle board/multilayer board/density board can be pressed! Solid wood/man-made board/metal plate can be pressed! PUR/EVA waterproof glue can be pressed! Wooden door/large board/small board/veneer, etc. can be pressed!

Learn more

120 ton hot press series -120 ton 3-layer hot press

It is mainly used in furniture factories or wood-based panel secondary processing factories for hot pressing and bonding furniture panels, building partitions, wooden doors and various decorative materials on the surface of various wood-based panels. It can also be used for drying and leveling of veneer and leveling of color decorative wood chips. Walnut/red oak/black trough can be pressed! Natural/dyeing/technology veneer, etc. can be pressed! 0.6-0.2cm can be pressed! Particle board/multilayer board/density board can be pressed! Solid wood/man-made board/metal plate can be pressed! PUR/EVA waterproof glue can be pressed! Wooden door/large board/small board/veneer, etc. can be pressed!

Learn more

By Mechanical Series

Contact Us