Product show
Select by application scenario
No data
Select by Mechanical Series
By mechanical series
MT2-08
Automatic production line for cold-press laminated double-layer door panels
At room temperature, rapid cold pressing takes only 45–90 seconds per door panel; thickness variation is within ±0.15 mm.
The door frame is coated with adhesive A on both sides, while the door panel is coated with adhesive B on one side. After lamination, a fast‑drying waterborne adhesive forms strong initial bond strength in a short time. Production cycle times vary depending on the substrate, manual assembly time, and ambient temperature.
Learn more
YT1-01
Furniture veneer production line
This production line was designed and developed by our company specifically for furniture and door manufacturers. It features longitudinal material feeding that completes the entire process in a single pass, minimizing defects such as veneer cracking and overlapping caused by manual loading. This ensures superior pressing and bonding quality, while accommodating double-sided veneering for products of various specifications.
Learn more
YT5-08
Five-layer furniture veneer production line
The “multi‑layer through‑type pressing” machine, combined with integrated electromechanical technology, meets the requirement for simultaneous lamination of multi‑layer panels. By enabling concurrent pressing of multiple layers, it significantly boosts production efficiency. This production line is primarily designed for specialized veneering in furniture and door manufacturing facilities, featuring a hot‑press cycle of 180 seconds and an average output of one panel every 40 seconds. After lamination, the panels exhibit seamless finishes and are environmentally friendly and non‑toxic; the bond strength achieved complies with the performance criteria stipulated by European standards for adhesive bonding.
Learn more
FT1-01
Honeycomb Automatic Composite Production Line
This production line uses a suction‑cup lifter to lower the panel, then proceeds with the press—raising, closing, applying pressure, and holding it at the set time—until the assembly of the panel, door frame, and base plate is complete. Once the press automatically opens, a belt conveyor transports the finished product to a turning conveyor.
Learn more
CT8-01
Varnish-free door panel cold-press composite production line
At room temperature, rapid cold pressing takes only 45–90 seconds per door; thickness variation is within 0.15 mm. The door frame is coated with adhesive A on both sides, while the door panel is coated with adhesive B on one side. After lamination, a fast‑drying waterborne adhesive forms strong initial bonding in a short time. Production cycle times vary depending on the substrate, labor‑related downtime, and ambient temperature.
Learn more
PT1-01
Automatic Flat-Labeling Production Line
After the press rises, closes, applies pressure, and holds the pressure for the set duration, the molded part is completed. Once the press automatically opens, a belt conveyor transports the part to a transfer conveyor.
Learn more
100-ton hot press series - 100-ton hot press
Primarily used in furniture factories or secondary‑processing plants for engineered boards, it is employed for hot‑press bonding of furniture panels, architectural partitions, and wooden doors, as well as for laminating various decorative materials onto the surfaces of different types of engineered boards. It can also be used to dry and flatten veneers, and to smooth and shape colored decorative wood chips.
It can press walnut, red oak, black slot, and more!
It can press natural, dyed, and engineered wood veneers!
It can handle thicknesses from 0.6 to 0.2 cm!
It can press particleboard, plywood, MDF, and other board types!
It can press solid wood, engineered boards, metal panels, and more!
It can press PUR, EVA, and other waterproof adhesives!
It can press wooden doors, large panels, small panels, decorative panels, and more!
Learn more
Short-Cycle Press Series – V63 Horizontal Short-Cycle Hot Press
Primarily used in furniture factories or secondary‑processing plants for engineered boards, it is employed for hot‑press bonding of furniture panels, architectural partitions, and wooden doors, as well as for laminating various decorative materials onto the surfaces of different types of engineered boards. It can also be used to dry and flatten veneers, and to smooth and shape colored decorative wood chips.
It can press walnut, red oak, black slot, and more!
It can press natural veneer, dyed veneer, and technical veneer!
It can handle thicknesses from 0.6 to 0.2 cm!
It can press particleboard, multilayer board, MDF, and more!
It can press solid wood, engineered boards, metal panels, and more!
It can press PUR and EVA waterproof adhesives!
It can press wooden doors, large panels, small panels, and decorative panels!
Learn more
Short-Cycle Press Series – VS Short-Cycle Hot Press
Primarily used in furniture factories or secondary‑processing plants for engineered boards, it is employed for hot‑press bonding of furniture panels, architectural partitions, and wooden doors, as well as for laminating various decorative materials onto the surfaces of different types of engineered boards. It can also be used to dry and flatten veneers, and to smooth and shape colored decorative wood chips.
It can press walnut, red oak, black slot, and more!
It can press natural veneer, dyed veneer, and technical veneer!
It can handle thicknesses from 0.6 to 0.2 cm!
It can press particleboard, plywood, MDF, and other board types!
It can press solid wood, engineered boards, metal panels, and more!
It can press PUR and EVA waterproof adhesives!
It can press wooden doors, large panels, small panels, decorative panels, and more!
Learn more
Short-Cycle Press Series – VT Short-Cycle Hot Press
Primarily used in furniture factories or secondary‑processing plants for engineered boards, it is employed for hot‑press bonding of furniture panels, architectural partitions, and wooden doors, as well as for laminating various decorative materials onto the surfaces of different types of engineered boards. It can also be used for drying and flattening veneers, and for leveling and shaping colored decorative wood chips.
It can press walnut, red oak, black slot, and more!
It can press natural, dyed, and engineered wood veneers!
It can handle thicknesses from 0.6 to 0.2 cm!
It can press particleboard, plywood, MDF, and other board types!
It can press solid wood, engineered boards, metal panels, and more!
It can press PUR, EVA, and other waterproof adhesives!
It can press wooden doors, large panels, small panels, decorative panels, and more!
Learn more
Short-Cycle Press Series – VM Short-Cycle Hot Press
Primarily used in furniture factories or secondary‑processing plants for engineered boards, it is employed for hot‑press bonding of furniture panels, architectural partitions, and wooden doors, as well as for laminating various decorative materials onto the surfaces of different types of engineered boards. It can also be used to dry and flatten veneers, and to smooth and shape colored decorative wood chips.
It can press walnut, red oak, black slot, and more!
It can press natural, dyed, and engineered wood veneers!
It can handle thicknesses from 0.2 to 0.6 cm!
It can press particleboard, plywood, MDF, and other board types!
It can press solid wood, engineered boards, metal panels, and more!
It can press PUR, EVA, and other waterproof adhesives!
It can press wooden doors, large panels, small panels, decorative panels, and more!
Learn more
Short-Cycle Press Series – V62 Short-Cycle Hot Press
Primarily used in furniture factories or secondary‑processing plants for engineered boards, this equipment is designed for hot‑press bonding of furniture panels, architectural partitions, and wooden doors, as well as for laminating various decorative materials onto the surfaces of different types of engineered boards. It can also be employed to dry and flatten veneers, and to smooth and shape colored decorative wood chips.
It can press walnut, red oak, black slot, and more!
It can press natural veneer, dyed veneer, and technical veneer alike!
It accommodates thicknesses from 0.2 to 0.6 cm!
It can press particleboard, plywood, MDF, and other board types!
It can press solid wood, engineered boards, metal panels, and more!
It can press PUR and EVA waterproof adhesives!
It can press wooden doors, large panels, small panels, decorative panels, and more!
Learn more
Contact Us
Foshan City Vario Machinery Co., Ltd. (Guangdong Headquarters)
Address: Lunjiao International Woodworking Machinery Mall, Shunde District, Foshan City, Guangdong Province, China
Tel：+86-757-27737650
Fax：+86-757-27737670
Email：vp@vario-press.com
Mobile: +86-13690226020
Shanxi Vario Hydraulic Machinery Co., Ltd. (Production base)
Address: No.108 National Road Section, Huitong Industrial Park, Jinzhong Development Zone, Shanxi Demonstration Zone, Jinzhong City, Shanxi Province,China
Tel：+86-354-3062609
Fax：+86-354-3062609
No data
What's App
Copyright © 2023 Foshan City Vario Machinery Co., Ltd. Powerby:300.cn | SEO | business license | Privacy Policy