Product Show-Foshan City Vario Machinery Co., Ltd.

YT5-08

Five-layer furniture veneer production line

"Multi-layer through the type of pressing" machine, electrical integration technology to achieve multi-layer boards at the same time pressure pasting requirements, multi-layer simultaneous pressing, effectively improve the production efficiency, this production line is mainly used for furniture factories and door factories specializing in laminating, hot pressing 180S, an average of 40S a board, the boards by the pressure pasted after the completion of the perfect non-marking, environmentally friendly and non-toxic; after gluing strength The strength after gluing reaches the technical performance index of gluing required by European standard.

Learn more

YT1-01

Furniture Veneer Production Line

This production line is my company for furniture factory and door factory veneer design and development, the production line longitudinal feeding a complete group of bad, maximize the avoidance of manual loading caused by cracking and overlapping defects of the surface material, can ensure the quality of the product pressure paste to meet the different specifications of the product double-sided pressure paste.

Learn more

MT5-08

Five-layer wooden door rapid cold pressing composite production line

"Multi-layer through-type pressing" machine, electrical integration technology to meet the requirements of multi-layer plate composite gluing, multi-layer simultaneous pressing, effectively improve the production efficiency, Cold pressing at room temperature for 5 minutes, with an average of 60S for a door. After processing, the plate is perfect, seamless, environmentally friendly and non-toxic. After gluing, the strength reaches the gluing technical performance index required by European standards.

Learn more

MT2-08

Stacked two-layer type door cold pressing composite automatic production line

Room temperature rapid cold pressing average of each door pressing as long as 45-90s; thickness error in the range of ± 0.15mm; Door frame double-sided coated with A glue, door plate single-sided coated with B glue, composite instantaneous drying water-based adhesive, can be formed in a short period of time a very strong initial bond; substrate, artificial group blank time, ambient temperature of different production beats are different.

Learn more

MT1-08

MT wooden door composite series-MT1-08 automatic short cycle fast composite production line

The average temperature fast cold pressing is only 45-90s for each door. The thickness error is within the range of 0.15mm; The door frame is coated with A glue on both sides, the door panel is coated with B glue on one side, and the instant-dry water-based adhesive after compounding can form a strong initial bonding force in a short time; The production rhythm is different with different substrate, artificial blank time and ambient temperature;

Learn more

MT1.1-01

MT Wooden Door Composite Series-MT1.1-01 Wooden Door Short Cycle Fast Composite Production Line

The average temperature fast cold pressing is only 45-90s for each door. The thickness error is within the range of 0.15mm; The door frame is coated with A glue on both sides, the door panel is coated with B glue on one side, and the instant-dry water-based adhesive after compounding can form a strong initial bonding force in a short time; The production rhythm is different with different substrate, artificial blank time and ambient temperature;

Learn more

MT1-010

Wooden door short cycle fast laminating production line

Room temperature rapid cold pressing average of each door pressing as long as 45-90s; thickness error in the range of ± 0.15mm; Door frame double-sided coated with A glue, door plate single-sided coated with B glue, composite instantaneous drying water-based adhesive, can be formed in a short period of time a very strong initial bond; substrate, artificial group blank time, ambient temperature of different production beats are different.

Learn more

MT5-01

Five-layer Wooden Door Rapid Cold-pressing Laminating Production Line

"Multi-layer through the type of pressing" machine, electrical integration technology to achieve multi-layer board pieces of composite gluing requirements, multi-layer simultaneous pressing, effectively improve production efficiency, cold pressure at room temperature for 5 minutes, an average of 60S a door, the board is processed by the completion of the perfect trace, environmental protection and non-toxicity; gluing strength to meet the European standards required by the gluing of the technical performance indicators. The strength after gluing reaches the technical performance index of gluing required by the European standard.

Learn more

100 Ton Hot Press Series - 100 Ton Hot Press

Mainly used in furniture factories or secondary processing factories for engineered wood to hot-press and bond furniture panels, building partitions, wooden doors, and to laminate various decorative materials on the surfaces of various engineered boards. It can also be used for drying and flattening veneers, as well as for flattening and shaping colored decorative wood chips. Walnut/Red Oak/Black Slot, etc. can all be pressed! Natural/Dyed/Technological veneers, etc. can all be pressed! Thicknesses from 0.6 to 0.2 cm can all be pressed! Particle board/Multi-layer board/Density board, etc. can all be pressed! Solid wood/Engineered board/Metal board, etc. can all be pressed! PUR/EVA waterproof glue, etc. can all be pressed! Wood doors/Large boards/Small boards/Decorative panels, etc. can all be pressed!

Learn more

100 Ton Hot Press Series - 100 Ton Hot Press

It is mainly used in furniture factories or secondary processing factories for engineered wood to hot-press and bond furniture panels, building partitions, wooden doors, and to press various decorative materials onto the surfaces of various engineered boards. It can also be used for drying and flattening veneers, as well as for flattening and shaping colored decorative wood chips. Walnut/Red Oak/Black Slot, etc. can all be pressed! Natural/Dyed/Engineered wood veneers, etc. can all be pressed! Thicknesses from 0.6 to 0.2 cm can all be pressed! Particle board/Multi-layer board/Density board, etc. can all be pressed! Solid wood/Engineered board/Metal board, etc. can all be pressed! PUR/EVA waterproof glue, etc. can all be pressed! Wood doors/Large boards/Small boards/Decorative panels, etc. can all be pressed!

Learn more

100 ton hot press series -100 ton 3-layer hot press

It is mainly used in furniture factories or wood-based panel secondary processing factories for hot pressing and bonding furniture panels, building partitions, wooden doors and various decorative materials on the surface of various wood-based panels. It can also be used for drying and leveling of veneer and leveling of color decorative wood chips. Walnut/red oak/black trough can be pressed! Natural/dyeing/technology veneer, etc. can be pressed! 0.6-0.2cm can be pressed! Particle board/multilayer board/density board can be pressed! Solid wood/man-made board/metal plate can be pressed! PUR/EVA waterproof glue can be pressed! Wooden door/large board/small board/veneer, etc. can be pressed!

Learn more

120 Ton Hot Press Series - 120 Ton Hot Press

Mainly used in furniture factories or secondary processing factories for engineered wood to hot-press and bond furniture panels, building partitions, wooden doors, and to press various decorative materials onto the surfaces of various engineered wood products. It can also be used for drying and flattening veneers, as well as for flattening and shaping colored decorative wood chips. Walnut / Red Oak / Black Slot, etc. can all be pressed! Natural / Dyed / Engineered Veneers, etc. can all be pressed! Thickness from 0.6 to 0.2 cm can all be pressed! Particleboard / Plywood / MDF, etc. can all be pressed! Solid wood / Engineered wood / Metal sheets, etc. can all be pressed! PUR / EVA waterproof glue, etc. can all be pressed! Wood doors / Large panels / Small panels / Veneer panels, etc. can all be pressed!

Learn more

120 ton hot press series -120 ton 5-layer hot press

It is mainly used in furniture factories or wood-based panel secondary processing factories for hot pressing and bonding furniture panels, building partitions, wooden doors and various decorative materials on the surface of various wood-based panels. It can also be used for drying and leveling of veneer and leveling of color decorative wood chips. Walnut/red oak/black trough can be pressed! Natural/dyeing/technology veneer, etc. can be pressed! 0.6-0.2cm can be pressed! Particle board/multilayer board/density board can be pressed! Solid wood/man-made board/metal plate can be pressed! PUR/EVA waterproof glue can be pressed! Wooden door/large board/small board/veneer, etc. can be pressed!

Learn more

Contact Us